Toyota Camry (XV70): Fuel Injector (for Direct Injection)
READ NEXT:
COMPONENTS ILLUSTRATION
*1 FUEL DELIVERY PIPE RH
*2 FUEL DELIVERY PIPE WITH SENSOR ASSEMBLY LH
*3 FUEL INJECTOR ASSEMBLY
*4 FUEL INJECTOR SEAL
*5 NO. 2
REMOVAL CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during fu
INSPECTION PROCEDURE 1. INSPECT FUEL INJECTOR ASSEMBLY
NOTICE: This inspection is for checking the fuel injector assembly for an open or short. Because the fuel injector assembly of this vehicle is
SEE MORE:
TERMINALS OF ECU CLEARANCE WARNING ECU ASSEMBLY
(a) Disconnect the R39 clearance warning ECU assembly connector.
(b) Measure the voltage and resistance on the wire harness side connector according to the value(s) in the table below.
Terminal No. (Symbol) Terminal Description
Condit
DCM ACTIVATION HINT: If the DCM (telematics transceiver) has been replaced, it is necessary to perform the Register Vehicle Information procedure.
DCM ACTIVATION (a) Connect the Techstream to the DLC3. (b) Turn the engine switch on (IG).
(c) Turn the Techstream on. (d) Choose "Telematics" from t