Toyota Camry (XV70): Vehicle Control History

Vehicle Control History (RoB)

Front Camera Unavailable See Owner's Manual

X2000

Yaw Rate Sensor Malfunction

History of yaw rate sensor malfunction signals output by the skid control ECU (brake actuator assembly)

Refer to How to Proceed with Troubleshooting in Vehicle Stability Control System.

w/ Electric Parking Brake System:

w/o Electric Parking Brake System:

Front Camera Unavailable See Owner's Manual

X2004

Speed Sensor Malfunction

History of vehicle speed sensor malfunction signals output by the skid control ECU (brake actuator assembly)

Refer to How to Proceed with Troubleshooting in Vehicle Stability Control System.

w/ Electric Parking Brake System:

w/o Electric Parking Brake System:

Pre-Collision System Malfunction Visit Your Dealer

X2014

Front Recognition Camera Optical Axis Not Adjusted

History of beam axis non-adjustment status by the forward recognition camera

HINT:

Forward recognition camera axis alignment can be performed by using either One Time Recognition, Sequential Recognition or Driving Adjustment.

One Time Recognition:

Sequential Recognition:

Driving Adjustment:

Front Camera Low Visibility Unavailable See Owner's Manual

X2015

Front Recognition Camera Dirt

History of forward recognition camera being unable to recognize the front and being temporarily unavailable

• Check for the following
  • Front wiper blade other than genuine part may be attached
  • Front wiper rubber may be deteriorated
  • There may be stickers, accessories, baggage, etc. in visual field range of forward recognition camera
  • There may be snow, ice, fog, dirt, frost, dust or oil film sticking on windshield glass in front of camera
  • There may be damage or cracks on windshield glass in front of camera
  • Windshield glass other than genuine part may be installed
  • Confirm the vehicle was not driven in poor weather (the warning display will disappear when the conditions [darkness, backlight, snow, fog, etc.] around the forward recognition camera improve and the forward recognition camera can be used again)
  • The inside of the windshield glass is dirty

• When foreign matter or dirt is attached to area around forward recognition camera

• If the inside of the windshield glass is dirty, clean it using glass cleaner.

  

Front Camera Out of Temperature Range Unavailable Wait until Normal Temperature

X2016

Front Recognition Camera Outside Guaranteed Operating Temperature

History of forward recognition camera being temporarily unavailable due to high temperature or low temperature

Using the Techstream, check the following items for the front recognition camera in the Data List.

• Front Recognition Camera Low Temperature
• Front Recognition Camera High Temperature 1

• The forward recognition camera is in one of the following conditions
  • When the ambient temperature is approximately -30°C (-22°F) or less, such as when the vehicle is left alone in an extremely cold environment
  • When the ambient temperature is approximately 80°C (176°F) or higher, such as when the vehicle is left alone in an extremely hot environment

Front Camera Unavailable See Owner's Manual

X2017

Front Recognition Camera Outside Guaranteed Operating Voltage

History of forward recognition camera being temporarily unavailable due to low voltage or high voltage

• Check the power supply voltage (IGB) of the forward recognition camera. For terminals to check and standard values, click here.

  

• If the power supply voltage was within the standard value, the forward recognition camera may be malfunctioning.

• The forward recognition camera is in one of the following conditions
  • When the input voltage is approximately 9 V or less, immediately after starting the engine
  • When the input voltage is approximately 16 V or higher, immediately after starting the engine

Front Camera Low Visibility Unavailable See Owner's Manual

X201C

Front Recognition Camera Haze

History of forward recognition camera being unable to recognize the front and being temporarily unavailable

1. Check for the following
   • Front wiper blade other than genuine part may be attached
   • Front wiper rubber may be deteriorated
   • There may be stickers, accessories, baggage, etc. in visual field range of forward recognition camera
   • There may be snow, ice, fog, dirt, frost, dust or oil film sticking on windshield glass in front of camera
   • There may be damage or cracks on windshield glass in front of camera
   • Windshield glass other than genuine part may be installed
   • Confirm the vehicle was not driven in poor weather (the warning display will disappear when the conditions [darkness, backlight, snow, fog, etc.] around the forward recognition camera improve and the forward recognition camera can be used again)
   • The inside of the windshield glass is dirty

• When foreign matter or dirt is attached to area around forward recognition camera

• If the inside of the windshield glass is dirty, clean it using glass cleaner.

  

Front Camera Unavailable See Owner's Manual

X204A

Acceleration Sensor Malfunction

History of G sensor malfunction signals output by the skid control ECU (brake actuator assembly)

Refer to How to Proceed with Troubleshooting in Vehicle Stability Control System.

w/ Electric Parking Brake System:

w/o Electric Parking Brake System:

Front Camera Unavailable See Owner's Manual

X204C

Zero Point Calibration of Yaw Rate Sensor Undone

The forward recognition camera received a yaw rate sensor zero point calibration not performed signal from the skid control ECU (brake actuator assembly)

Refer to How to Proceed with Troubleshooting in Vehicle Stability Control System.

w/ Electric Parking Brake System:

w/o Electric Parking Brake System:

Vehicle Control History (RoB)