Toyota Camry (XV70): Fuel Lid Opener Motor Assembly
Toyota Camry Repair Manual XV70 (2018-2024) / Vehicle Exterior / Door / Hatch / Fuel Lid Opener Motor Assembly
READ NEXT:
Components
COMPONENTS ILLUSTRATION
*1 LUGGAGE COMPARTMENT TRIM INNER COVER LH
*2 NO. 1 LUGGAGE COMPARTMENT TRIM HOOK
*3 REAR FLOOR FINISH PLATE
*4 SPARE WHEEL COVER AS
Removal
REMOVAL PROCEDURE 1. REMOVE SPARE WHEEL COVER ASSEMBLY
Click here 2. REMOVE SPARE WHEEL COVER TRAY
Click here 3. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK
Click here 4. REMOVE REAR FLO
Inspection
INSPECTION PROCEDURE 1. INSPECT FUEL LID LOCK WITH MOTOR ASSEMBLY
(a) Check the operation of the fuel lid lock with motor assembly (motor operation).
(1) Apply battery voltage to the fuel lid lo
SEE MORE:
Disassembly
DISASSEMBLY PROCEDURE 1. REMOVE MAGNET STARTER SWITCH ASSEMBLY
(a) Remove the nut and disconnect the field coil lead wire from the magnet starter switch assembly.
(b) While holding the magnet starter switch assembly to the repair service starter kit, remove the 2 nuts.
Dtc Check / Clear
DTC CHECK / CLEAR CHECK DTCs (USING TECHSTREAM)
(a) Turn the ignition switch off. (b) Connect the Techstream to the DLC3.
(c) Turn the ignition switch to ON. (d) Turn the Techstream on.
(e) Enter the following menus: Chassis / EMPS / Trouble Codes. Chassis > EMPS > Trouble Codes
(f
© 2023-2026 Copyright www.tocamry.com
