Toyota Camry (XV70): Rear Light Assembly
READ NEXT:
COMPONENTS ILLUSTRATION
*1 LUGGAGE COMPARTMENT DOOR COVER
- - ILLUSTRATION
*A for LED Type Back-up Light
*B for Bulb Type Back-up Light
*1
REMOVAL CAUTION / NOTICE / HINT
HINT:
Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
PROCEDURE 1. REMOVE LUGGAGE COMPARTMENT DOOR CO
DISASSEMBLY CAUTION / NOTICE / HINT
HINT:
Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
PROCEDURE 1. REMOVE BACK-UP LIGHT BULB (for
SEE MORE:
INSTALLATION PROCEDURE 1. INSTALL FUEL MAIN VALVE ASSEMBLY
(a) Apply gasoline to 2 new O-rings. Then install the O-rings to the fuel main valve assembly (for Low Pressure).
(b) Apply gasoline to 2 new O-rings. Then install the O-rings to the fuel main valve assembly (for High Pressure).
(c) In
DESCRIPTION If the certification ECU (smart key ECU assembly) detects a communication error with an ECU connected to the certification bus lines for 7 seconds or more, DTC B2785 will be stored.
DTC No. Detection Item
DTC Detection Condition Trouble Area
B2785 Communication M