Toyota Camry (XV70): Steps to take in an emergency
Toyota Camry Owner's Manual XV70 (2017-2024) / When trouble arises / Steps to take in
an emergency
- If your vehicle needs to be towed
- If you think something is wrong
- Fuel pump shut off system
- If a warning light turns on or a warning buzzer sounds
- If a warning message is displayed
- If you have a flat tire
- Taking out the spare tire
- Replacing a flat tire
- Installing the spare tire
- If the engine will not start
- If the electronic key does not operate properly (vehicles with a smart key system)
- If the vehicle battery is discharged
- If your vehicle overheats
- If the vehicle becomes stuck
READ NEXT:
If your vehicle needs
to be towed
If towing is necessary, we recommend having your vehicle
towed by your Toyota dealer or commercial towing service,
using a wheel-lift type truck or flatbed truck.
Use a safety chain system for al
If you think something
is wrong
If you notice any of the following symptoms, your vehicle probably
needs adjustment or repair. Contact your Toyota dealer as
soon as possible.
Visible symptoms
Fluid leaks under the vehicle.
Fuel pump shut off
system
To minimize the risk of fuel leakage when the engine stalls or
when an airbag inflates upon collision, the fuel pump shut off
system stops the supply of fuel to the engine.
Follow the procedure bel
SEE MORE:
Disassembly
DISASSEMBLY PROCEDURE 1. REMOVE MAGNET STARTER SWITCH ASSEMBLY
(a) Remove the nut and disconnect the field coil lead wire from the magnet starter switch assembly.
(b) While holding the magnet starter switch assembly to the repair service starter kit, remove the 2 nuts.
Brake Pressure Sensor "A" Circuit Voltage Out of Range (C05401C,C054028,C054049)
DESCRIPTION The master cylinder pressure sensor is connected to the skid control ECU in the brake actuator assembly.
DTC No. Detection Item
DTC Detection Condition Trouble Area
C05401C Brake Pressure Sensor "A" Circuit Voltage Out of Range
The voltage of the master
© 2023-2026 Copyright www.tocamry.com
